M18 X 1.5 BaerCoil Inserts (Helicoil Type)

M18 X 1.5 BaerCoil Inserts (Helicoil Type)BaerCoil Wire Thread Inserts Standard DIN 8140, Toleranz ISO 2 (6H) Stainless Steel (AISI 304), type: "free running" length measurement: 1,5 D means 1,5 times thread diameter equals thread lenght, e. g. M 3: 1,5 times 3 = 4,5mm BaerCoil: Thread Repair of damaged or worn out threads Recovery of rejected items Thread Armour Plating. For material with low shear strenght eg. aluminium alloys and magnesium alloys. Due to narrow and exact tolerances the new

BaerCoil instruction for use

20 mm P (depth) The thread insert must sit 1/4 - 1/2 turns below the surface B (thread depth with chamfer) 14

With this BaerCoil® thread repair set it is possible to repair through hole threads and blind-hole threads in M 11 x 1

a finished thread with oversize can be cut in one operation as a holding thread for wire thread inserts of dimension M 8 x 1

24 mm F (Min

Diameter 16 Pitch 1

With this BaerCoil® thread repair set it is possible to repair through hole and blind-hole threads in UNC No

12 Pitch 24 Dimension UNC No

With this BaerCoil® thread repair set it is possible to repair through hole and blind hole threads in G (BSP) 3/8 x 19

NPT 3/4 x 14

Diameter 4 Pitch 0

BaerCoil® thread inserts help to save carrier material and to use smaller or shorter screw connections