M8 x 0.75 BaerCoil Bottoming Tap (Helicoil Type)

M8 x 0.75 BaerCoil Bottoming Tap (Helicoil Type)BaerCoil Tap HSSG (Bottoming Tap) Form D, Tolerance ISO 1 (4H) for Wire Thread Inserts ISO 2 (6H) D1 = 8. 9 mm D2 = 10 mm L1 = 80 mm L2 = 24 mm Square = 8 mm Drill Size: 8. 20 mm (suitable drills in shop) BaerCoil: Thread Repair of damaged or worn out threads Recovery of rejected items Thread Armour Plating. For material with low shear strenght eg. aluminium alloys and magnesium alloys. Due to narrow and exact tolerances the new thread normally is

6 Pitch 32 Dimension UNC No

70 mm P (depth) The thread insert must sit 1/4 - 1/2 turns below the surface B (thread depth with chamfer) 5

1 x BaerCoil Inserting Tool

BSW 7/8 x 9

5 D T (Length when installed) 21 mm Thread length calculation 1

the thread produced is significantly more stable than the original thread

Attributes

00 mm P (depth) The thread insert must sit 1/4 - 1/2 turns below the surface B (thread depth with chamfer) 24

With this BaerCoil® thread repair set it is possible to repair through hole threads and blind hole threads in MF 18 x 2

5 D means 1

BaerCoil Thread Repair Kit UNF 8 x 36

0035 S185 (St33) 1