M11 x 1.0 BaerCoil Bottoming Tap (Helicoil Type)

M11 x 1.0 BaerCoil Bottoming Tap (Helicoil Type)BaerCoil Tap HSSG (Bottoming Tap) Form D, Tolerance ISO 1 (4H) for Wire Thread Inserts ISO 2 (6H) D1 = 12. 2 mm D2 = 9 mm L1 = 89 mm L2 = 29 mm Square = 7. 1 mm Drill Size: 11. 30 mm (suitable drills in shop) BaerCoil: Thread Repair of damaged or worn out threads Recovery of rejected items Thread Armour Plating. For material with low shear strenght eg. aluminium alloys and magnesium alloys. Due to narrow and exact tolerances the new thread normally is

1 x EBW10: BaerCoil installation tool UNC 7/16 x 14

5 D M 6 x 1

Diameter 3/8 Pitch 24 Dimension UNF 3/8 x 24 Length 1

Diameter 3/8 Pitch 16 Dimension UNC 3/8 x 16 Length 1

automotive

40 mm P (depth) The thread insert must sit 1/4 - 1/2 turns below the surface B (thread depth with chamfer) 38

outside diameter of thread insert) 17

The nominal diameter for UNF 7/16 is approx

UNC 1/2 x 13

Diameter 4 Pitch 0

With this BaerCoil® thread repair-set it is possible to repair through hole threads and blind hole threads in UNC 3/4 x 10

Diameter: 22