Hall Effect Sensor For Mini Electric Linear Actuator A 2000N (Model 0043021)

Hall Effect Sensor For Mini Electric Linear Actuator A 2000N (Model 0043021)Hall Effect Sensor For Electric Linear Actuator A: If you want to use a synchronous controller to operate 2 or 4 linear actuators fully synchronously, you will need to add built in Hall effect sensors to each linear actuator. If you purchased Hall effect sensor along with linear actuator, we will install Hall effect sensor to linear actuator for you. When 2 or 4 linear actuators are running together, Hall sensor will send Hall signals to the

and M16 screws are used for larger loads

resulting in a retraction length of 960 mm

Click to Download 3D CAD Model File in STEP format 350MM [14 in] Actuator

so linear actuator or motor's maximum starting current cannot exceed 10A

E09: The total current of the power supply is overcurrent

Type 1: Four-core Wire Linear Actuator with Built-in Normally Open Limit Switch Signal Output

Working Current: 65mA (when the transmitter is transmitting the signal)

resulting in a retraction length of 665 mm

000 cycles Plug Standard Six-pin Plug Linear Actuator Cable Length 2000±10%mm [20 in] (The length can also be customized according to your specific needs) Certifications CE Environment Temperature -26℃ to 85℃ Operating Noise about 46dB~56dB (Linear actuators with different parameters will have different noise levels

rotates in  direction

such as 650mm

Please refer to the connection diagram below