Linear Actuator Manual Controller Momentary Control Handle (Model 0043011)

Linear Actuator Manual Controller Momentary Control Handle (Model 0043011)Product parameters: Operating voltage range: DC 3V ~ 36V Maximum load current: 5A Power female socket: DC5. 5 2. 1 (inner diameter 2. 1mm, outer diameter 5. 5mm), and compatible with DC5. 5 2. 5 Output socket: Standard Four hole Socket or Ordinary Two core Wire Control handle has two buttons, momentary work mode. Suitable for DC 12V, 24V linear actuators, such as linear actuators A, A2, A3, A4, L, E, G, G2, H. Connection: 1. Connect the power plug of

2) Connect two wires of motor or linear actuator to terminals <Motor>

Stroke and Length (Model 0041505) Parameter Value Stroke 500mm Retraction Length 650mm (center distance between two mounting holes when the linear actuator is fully retracted) Extension Length 1150mm (center distance between two mounting holes when the linear actuator is fully extended) The linear actuator has two built-in limit switches

Operating Voltage: 6V (2 x CR2016 -3V button cell batteries

Remote Control Distance: 1000m / 3000ft (theoretically)

2) Connect the positive pole of the DC power supply to the terminal <NO> of two relays

Model: 0010139

and connect terminal <-> to the negative pole of DC lamp

resulting in a retraction length of 1155 mm

Switch the working mode or switch the number of operating channels:

Press and hold the “Retracted” button

2 actuators: 12V/50A or 24V/25A

Press the button A again: The terminal <OUPUT1> of the receiver stops outputting