6 Inch 150MM High Capacity Linear Actuator with Hall Effect Sensor for Synchronized Control (Model 0041603-1)

6 Inch 150MM High Capacity Linear Actuator with Hall Effect Sensor for Synchronized Control (Model 0041603-1)This is a 150mm stroke high performance linear actuator with a built in Hall effect sensor, designed for heavy lifting operations, providing ultra high push pull forces of up to 2,700 lbs (12,000 N). It features a manual override, allowing users to extend and retract the actuator's telescopic rod using hand tools even in the event of a power outage. It is widely used in doors, windows, cellars, trapdoors, hatchways, solar tracking system, medical

Maximum Rated Power: 200W for 12VDC

Rated current: 10A

and the actual working speed will gradually slow down as the load increases

1mm Plug) or 12A (Needs to be replaced with an XT60 type output plug

Standby Current: 5μA

or by operating the sliding potentiometer or rotary potentiometer connected to the controller

the error code will be shown on the display

100 mm Actuator Corresponding Speed and Maximum Thrust No-load Speed Full load Speed Maximum Thrust Self-locking Force 5mm/s 2

Application:We can connect one or two external limit switches to the linear actuator and use them to flexibly adjust the travel range of the linear actuator

1 x Rocker Speed Governor (0044007)

5~1A at 24V Full Load Current 6~12A at 12V or 3~6A at 24V Recommended Power Supply 12V/10A or 24V/5A Shaft Diameter 24mm [0

Product Specifications Parameter Value Working Voltage DC 12V or DC 24V (24V most commonly used) Stroke 20 inches / 500 mm Optional Speed (No-load) 45±5mm/s