Electric Linear Actuator Fixed Mounting Bracket J (Model 0043152)

Electric Linear Actuator Fixed Mounting Bracket J (Model 0043152)Fixed mounting bracket for electric linear actuator. Each linear actuator would require two mounting brackets, one to fix the head of linear actuator and another to fix the bottom of linear actuator. This mounting bracket can be installed on waterproof linear actuator J or high speed high speed linear actuator D . Iron material. Includes a bracket, a wedge, a needle. Thickness: 3. 7mm [0. 146 in] Diameter of the wedge hole: 8. 2mm [0. 323 in] Diameter

Stroke and Length (Model 0041536) Parameter Value Stroke 1200mm Retraction Length 1375mm (center distance between two mounting holes when the linear actuator is fully retracted) Extension Length 2575mm (center distance between two mounting holes when the linear actuator is fully extended) The linear actuator has two built-in limit switches

you can also choose to retain the original standard retraction length of 625 mm

This flat plate bracket needs to be ordered together with the linear actuator C

Users can set the device to run automatically at different times during the day

Please select the right speed according to the speed and maximum load you need

E01: The linear actuators encounter resistance during movement and need to retract the linear actuators

you can change these two wires to change the rotating direction of motor or the moving direction of linear actuator

2) Control small bi-directional AC motor (three control lines):

if disconnect two terminals <COM> and <DOWN>

5mm/s 2500 N / 250 kg / 560 lbs 2500 N / 250 kg / 560 lbs 13mm/s 7mm/s 2000 N / 200 kg / 450 lbs 2000 N / 200 kg / 450 lbs 16mm/s 8

Encoding Type: Fixed code by soldering

Includes a flat plate bracket and four M5 screws