1M Extension Cable for Control Handle of Synchronous Controller with Adapter (Model 0043211)

1M Extension Cable for Control Handle of Synchronous Controller with Adapter (Model 0043211)The control handle cable for the electric linear actuator's synchronous controller is only 2 meters long. If you need a longer cable, please purchase this control handle extension cable. This extension cable is 1 meter long and comes with an adapter. You can use it to extend the distance between the control handle and the synchronous controller.

a specified retraction length of 1325 mm is less than the standard retraction length of the ordered actuator (1375 mm)

This is a 50mm high-performance linear actuator designed for heavy lifting operations

This is a micro-industrial linear actuator with an adjustable stroke and a standard stroke of 400 mm

a stroke of 800mm

CP-3 (500 Meter / 1500 feet)

Stroke and Length (Model 0041943-1) Parameter Value Stroke 600 mm Retraction Length 780 mm (center distance between two mounting holes when the linear actuator is fully retracted) Extension Length 1380 mm (center distance between two mounting holes when the linear actuator is fully extended) The linear actuator has two built-in limit switches

Press and hold the button 1 on the transmitter: Motor rotates in positive direction

Note: After the stroke rod is manually pulled out

two terminals <NO> and <COM> of < Relay 4> are connected

up to 3000 N / 300 kg / 670 lbs at 20mm/s

Press the Channel3 again: the relay 3 is deactivated

you can set it to move within a stroke range of 50 mm to 350 mm