2000N Adjustable Stroke Linear Actuator with NC Magnetic Reed Switch 16 Inch 400MM Stroke (Model 0041506-4)

2000N Adjustable Stroke Linear Actuator with NC Magnetic Reed Switch 16 Inch 400MM Stroke (Model 0041506-4)This is a micro industrial linear actuator with an adjustable stroke and a standard stroke of 400 mm. It is equipped with two external normally closed magnetic switches that can slide freely, and by adjusting the position of these two normally closed magnetic switches, the linear actuator can be controlled to work within the set stroke length. For example, for a linear actuator with a stroke of 400 mm, you can set it to move within a stroke range of

This is a micro-industrial linear actuator with adjustable stroke and standard stroke of 200 mm

weight: 160g

set the device to start once every hour

Diameter of the wedge hole: 12

You can also adjust the speed of each DC motor or linear actuator by two knobs on the receiver

This is a 1000 mm heavy-duty electric linear actuator with a built-in potentiometer and a thrust of up to 5000 N

Stroke and Length (Model 0041631) Parameter Value Stroke 30mm Retraction Length 135mm (center distance between two mounting holes when the linear actuator is fully retracted) Extension Length 165mm (center distance between two mounting holes when the linear actuator is fully extended) The linear actuator has two built-in limit switches

You need to use a DC24V/50A or DC12V/100A switching power supply to power this kit

2 Selectable Modes: Interlocking

a specified retraction length of 755 mm is less than the standard retraction length of the ordered actuator (785 mm)

2) Connect the positive pole of the DC power supply to the terminal <B> of each two relays

24V optional