2000N Adjustable Stroke Linear Actuator with NC Magnetic Reed Switch 4 Inch 100MM Stroke (Model 0041502-4)

2000N Adjustable Stroke Linear Actuator with NC Magnetic Reed Switch 4 Inch 100MM Stroke (Model 0041502-4)This is a micro industrial linear actuator with an adjustable stroke and a standard stroke of 100 mm. It is equipped with two external normally closed magnetic switches that can slide freely, and by adjusting the position of these two normally closed magnetic switches, the linear actuator can be controlled to work within the set stroke length. For example, for a linear actuator with a stroke of 100 mm, you can set it to move within a stroke range of

Feedback Function:

Suitable Wires for Connecting Terminals: 22-12 AWG

This is an IP67 waterproof electric linear actuator with a stroke of 250mm and a maximum thrust of 3500N (350 kg / 780 lbs)

1) Setting Interlocking mode: Do not short any pins

Operation with DC motor:1) Press and hold the "Up" button

Hole diameter: 22 MM

Release the button 12: The relay 12 is deactivated

But in the practice

you can also choose to retain the original standard retraction length of 775 mm

This is a 200 mm industrial electric linear actuator with a built-in Hall effect sensor and a thrust of up to 6000 N

so motor's maximum starting current can not exceed 30A

and a maximum thrust of 2000N / 200kg / 450lbs