24 In 600MM Adjustable Stroke Industrial Linear Actuator with NC Magnetic Reed Switch (Model 0041517-4)

24 In 600MM Adjustable Stroke Industrial Linear Actuator with NC Magnetic Reed Switch (Model 0041517-4)This is an adjustable stroke industrial linear actuator with a standard stroke of 600mm. It is equipped with two external normally closed magnetic switches that can slide freely. By adjusting the positions of these two normally closed magnetic switches, the linear actuator can be controlled to work within the set stroke length. For example, for a linear actuator with a stroke of 600mm, you can set it to move within a stroke range of 50mm to 560mm. Key

you can set it to move within a stroke range of 40 mm to 130 mm

Channel / Button: 2

Stroke and Length (Model 0041564) Parameter Value Stroke 200mm Retraction Length 435mm (center distance between two mounting holes when the linear actuator is fully retracted) Extension Length 635mm (center distance between two mounting holes when the linear actuator is fully extended) The linear actuator has two built-in limit switches

resulting in a retraction length of 430 mm

) IP Rating IP67 (Ideal for use outdoors or in the rain

and then install this flat plate bracket

This force is usually 3-5 times the weight of the cabinet door

reducing code collision and unauthorized code scanning possibilities

DC 36V or DC 48V (24V most commonly used) Stroke 6 inches / 150 mm Optional Speed (No-load) 5±1mm/s

remote controls (RC) and so on

Connect two wires of the motor or the linear actuator to terminals <Motor> of the receiver

Initial state of relay output terminals: Terminals <COM> and <NO> are Normally Open